Skip to content

Specs & Connectors

12.3inch

A full LCD cluster built for the 1996–2000 Civic EK. Factory plugs, no cutting.

1920×720Resolution
60 HzRefresh
16.7 MColors
−30~85℃Operating

Technical data only, taken from the panel datasheet and the current firmware. How the features work is on the Civic EK cluster page; fitment is on Fitment and chassis codes. The manual and the unit itself take precedence over anything here.

ItemSpec
Panel12.3-inch a-Si TFT, normally black
Resolution1920 (H) × 720 (V)
Colors16.7 M
Pixel pitch0.1523 × 0.1523 mm, RGB vertical stripe
Viewing angleAll angles
Backlight80 LEDs, constant current
Display interface2× LVDS, 40-pin connector
Outline312.40 × 134.86 × 7.30 mm
Active area292.32 × 109.62 mm
Weight466 g (±5%)

The orange bar is the range the spec allows, the white line is the typical value, and the numbers at each end are the scale of that chart.

Operating temp−30 ~ 85 ℃
−40 ℃100 ℃
Storage temp−40 ~ 95 ℃
−40 ℃100 ℃
Logic supply VDD3.0 ~ 3.6 V, typ. 3.3 V
0 V4 V
Frame rate55 ~ 65 Hz, typ. 60 Hz
0 Hz70 Hz
Backlight current240 ~ 300 mA, typ. 240 mA
0 mA320 mA
ItemMinTypMaxUnit
Logic supply VDD3.03.33.6V
Backlight forward voltage VF21.625.628V
Backlight forward current IF—240300mA
Backlight power—8.4—W
Pixel clock90100130MHz
LVDS clock44.747.561MHz
Frame rate556065Hz
LED life20000——h

40-pin connector, dual LVDS: odd and even differential data pairs plus one clock pair. Power and ground take the rest. The table groups pins by function and lists only the key signals in each group.

Power and ground

VDDLogic supply · pins 34–38
GNDGround · remaining ground pins

LVDS clock

RXOCLKIN±Differential clock in · pins 12 / 13

Odd channel data

RXOIN0±pins 3 / 4
RXOIN1±pins 6 / 7
RXOIN2±pins 9 / 10
RXOIN3±pins 15 / 16

Even channel data

RXEIN0±pins 18 / 19
RXEIN1±pins 21 / 22
RXEIN2±pins 24 / 25
RXEIN3±pins 27 / 28

Control and feedback

STVDFeedback · pin 30
RESETGlobal reset · pin 32

Power-up order is VDD → RESET → digital signals → backlight, and the reverse on shutdown. The panel runs a high-voltage driver, so the wrong order can damage it. The harness is wired in this order by the installer — nothing for the customer to do.

ItemNotes
EnvironmentalRoHS compliant
Weight tolerance±5% on LCM weight
Warranty12 months
Basis for these figuresThe manual shipped with the unit and the current firmware; fitment is on Fitment and chassis codes