Patch
Download
Section titled “Download”Patch
| Model | Version | Date | Size | Download |
|---|---|---|---|---|
| EK Civic 12.3-inch | v30 | 2026-11-19 | 82 KB | Download |
EK12-Patch-v30.zipSHA256 104982e6667abd5e7949fd974472f1d8d18c7f2ec2534d363c2170fb33808f79
What This Patch Fixes
Section titled “What This Patch Fixes”- Fuel gauge display: the reading jumped around and didn’t match the actual fuel level.
- Cluster display lag: data refreshed late after starting the car, and the screen caught up slowly.
Only these two things — layouts and settings are untouched. Your layout, logo and RPM limits are still there after flashing.
The patch is small: unzip it and you get a single jly_can_1525_261116_v30.bin file.
Applies To
Section titled “Applies To”- EK Civic 12.3-inch cluster (CAN version)
- Patch version v30, 2026-11-19
How to Flash
Section titled “How to Flash”- Engine off, ignition in the ON position (don’t start the engine).
- Unzip the downloaded archive — the archive itself can’t go on the drive.
- Copy the extracted .bin file to a FAT32 USB drive, 32 GB or smaller, and nothing else on it.
- Power up the cluster, plug the drive into the cluster’s USB port, and it starts updating on its own.
- When green text appears, the update is done. Unplug the drive.
Confirm the Update
Section titled “Confirm the Update”Open the settings menu and check the version — if it shows v30, the patch is in.
Nothing Happens, or It Fails
Section titled “Nothing Happens, or It Fails”- No reaction when plugged in: unplug, power cycle, plug it in again.
- Still nothing: try another FAT32 drive, and make sure the archive was extracted and nothing else is on the drive.
- Two failures in a row: stop, and contact support.
