Skip to content

Logo Pack

The cluster already holds a set of vehicle logos. They’re just not unlocked at the factory.

Flashing this package opens the choice: after that, a logo option appears in the cluster menu and you pick which one to show. No images to copy, no files to edit — the artwork is already in the cluster, so it’s normal that the package contains no pictures.

Not the Same as Firmware or Boot Animation

Section titled “Not the Same as Firmware or Boot Animation”

All three are flashed from a USB drive, but only one package per drive:

  • Firmware: changes the cluster’s features and layouts
  • Boot animation package: changes the startup and shutdown screens
  • Logo package: unlocks the logo picker

Mixing them makes the flash fail and nothing installs. To change several things, do several passes: flash one, unplug, let the cluster restart, clear the drive, then flash the next.

Enter the password I sent you to unlock the download, then check the SHA256 against the one shown here before using it.

Customer download

This package is for customers who bought the cluster. Enter the password I sent you to unlock the download.

No password yet? Reach me from the purchase page and I will send it.

The package is only 161 bytes and contains a single line of configuration — that’s not a broken download.

  1. Unzip the downloaded archive — the archive itself can’t go on the drive.
  2. Use a FAT32 drive, 32 GB or smaller, and empty it first.
  3. Copy the whole ui_res folder to the root of the drive — nothing else on it.
  4. Engine off, ignition in the ON position (don’t start the engine), then plug the drive into the cluster’s USB port.
  5. The cluster reads and writes on its own. Unplug when it’s done.
  6. Power off and on again, then pick your logo in the cluster menu.
  • No logo option in the menu: make sure the flash finished (don’t cut power before unplugging), then power cycle and look again.
  • No reaction when plugged in: check the drive is FAT32 and 32 GB or smaller, and try another drive.
  • Want a logo that isn’t included: adding new artwork means changing the UI — contact support.
  • Two failures in a row: stop, and contact support.